Review Conference 2019

Wednesday, February 6, 2019

Session 1 – Introduction and Keynotes

09:00 Introduction
Prof. Thomas Bergs, Fraunhofer Institute for Production Technology IPT, Aachen (DE)
Prof. Johannes Henrich Schleifenbaum, Fraunhofer Institute for Laser Technology ILT, Aachen (DE)
09:05 Networked, Adapted Production of Turbomachinery Components
Prof. Thomas Bergs, Fraunhofer Institute for Production Technology IPT, Aachen (DE)
09:30 Trends and new Technologies in the Production of Stationary Gas Turbines and Turbo Machines
Michael Kleinhenz, MAN Energy Solutions SE, Oberhausen (DE)
10:00 Smart Factory @ MTU
Lars Wagner, MTU Aero Engines AG, München (DE)
10:30 Coffee Break – Visit of the Industrial Exhibition

Session 2 – Digitalization

11:00 Advanced Multiblade Machining through Enhanced Tool Path Calculation Approaches
Dr. Marc Stautner, ModuleWorks GmbH, Aachen (DE)
11:30 Being Sure in the Digital Production with Advanced Metrology Technology
Dr. Dietrich Imkamp, Carl Zeiss Industrielle Messtechnik GmbH, Oberkochen (DE)
12:00 Manufacturing Turbomachinery Components in a Digital Environment
Dr. Sascha Gierlings, Fraunhofer Institute for Production Technology IPT, Aachen (DE)
12:30 Lunch Break – Visit of the Industrial Exhibition

Session 3 – Monitoring / Safety

14:00 Regulatory Considerations for Process Monitoring and NDE of Advanced Manufacturing Processes
Michael Gorelik, PhD, Federal Aviation Administration, Phoenix (US)
14:30 Systems and Strategies for Process and Machine Condition Monitoring
Dr. Dirk Lange, MARPOSS Monitoring Solutions GmbH, Egestorf (DE)
15:00 The Importance of Special Processes for Aeroengine Component Manufacturing
Dr. Thomas Haubold, Rolls-Royce Deutschland Ltd. & Co KG, Oberursel (DE)
15:30 Live Presentations at Fraunhofer Institutes - Highlights
Talu Ünal-Saewe, Fraunhofer Institue for Laser Technology ILT, Aachen (DE)
Philipp Ganser, Fraunhofer Institue for Production Technology IPT, Aachen (DE)
15:45 Transfer to Fraunhofer Facilities by Shuttle Bus

Session 4 – Live Presentations

16:00 Live Presentations at the Fraunhofer Institutes
18:30 End of Live Presentations
Transfer back to Eurogress Conference Center

Evening Event

20:00 Networking Event with Dinner
"Coronation Hall" of Aachen, doors open at 19:30 h
23:30 End of Evening Event
  Program subject to minor changes.

Thursday, February 7, 2019

Session 5 – Additive Manufacturing

09:00 Evolution Instead of Revolution: Additive Manufacturing from the Perspective of a Full-Service Provider
Christoph Hauck, MBFZ toolcraft GmbH, Georgensgmünd (DE)
09:30 Increase of Productivity by Using Adaptive LPBF Process Strategy
Anders Such, MAN Energy Solutions SE, Oberhausen (DE)
10:00 Maintenance, Repair and Overhaul of Gas Turbine Components with LMD for Lifetime Extension
Dr. Bernd Burbaum, Siemens AG, Berlin (DE)
10:30 Coffee Break – Visit of the Industrial Exhibition

Session 6 – Advanced Machining

11:00 Advancements in EDM  Solutions for the Production of Turbomachinery Components
Dr. David Welling, Makino Europe GmbH, Aachen (DE)
11:30 The Leading Edge  A Toolmakers View on the Challenges in Turbomachinery Manufacturing
Dr. Manuel Wacinski, Kennametal Shared Services GmbH, Fürth (DE)
12:00 Adaptive and Intelligent Clamping Technology  Applications in Turbomachinery and Aerospace Industry
Roman Kalocsay, Innoclamp GmbH, Aachen (DE)
12:30 Lunch Break – Visit of the Industrial Exhibition

Session 7 – Material / Design

14:00 Model-based Definition of Processes and Materials
Jean Philippe Thomas, Pratt & Whitney, MPE, East Hartford (US)
14:30 Ceramic Matrix Composites for Next Generation Gas Turbines
Dr. Florian Reichert, Schunk Kohlenstofftechnik GmbH, Heuchelheim (DE)
15:00 Importance of New Nickel and Cobalt Alloys for Future Turbomachinery Applications
Dr. Tatiana Hentrich, VDM Metals International GmbH, Werdohl (DE)

Session 8 – Closing

15:30 Future of Aviation – Innovations and Perspectives
Dr. Jochen Kaiser, Bauhaus Luftfahrt e.V., Taufkirchen (DE)
16:00 End of Sessions
  Program subject to minor changes.

Industrial Exhibition

During the accompanying industrial exhibition in the foyer of the conference center various suppliers will present new products and latest trends. Benefit from the exchange of information and know-how at the industrial exhibition as a perfect addition to the ICTM conference. Discuss innovative solutions to your specific problems one-to-one with well-known companies.

  Aconity 3D GmbH
Kaiserstr. 98
52134 Herzogenrath, Germany
  ACunity GmbH
Steinbachstr. 15
52074 Aachen, Germany
  AUBERT & DUVAL – Booth No. 13a
10 Boulevard de Grenelle CS63205
75015 Paris, France
8 rue Schertz CS 60264
67089 Strasbourg CEDEX, France
  EMAG GmbH & CO. KG – Booth No. 13b
Austraße 24
73084 Salach, Germany
  GF Machining Solutions GmbH – Booth No. 11
Steinbeisstrasse 22-24
73614 Schorndorf, Germany
  IXUN Lasertechnik GmbH – Booth No. 9
Steinbachstr. 15
52074 Aahcne, Germany
  KUKA Industries GmbH & Co. KG – Booth No. 3
Geschäftsbereich Reis Lasertec
St. Jobser Straße 53
52146 Würselen, Germany
Siemensstr. 6
90766 Fürth, Germany

  Mitsubishi Electric Europe B.V. German Branch – Booth No. 17
Mitsubishi Electric Platz 1
40882 Ratingen, Germany
  Siemens AG – Booth No. 14
Digital Factory Division
Motion Control
Frauenauracher Str. 80
91056 Erlangen, Germany
  Synova S.A.
Route de Genolier 13
1266 Duillier, Switzerland
  SUMITOMO ELECTRIC Hardmetal Corp.  – Booth No. 16
1-1-1, Koya-kita, Itami, Hyogo 664-0016
  MBFZ toolcraft GmbH
Handelsstr. 1
91166 Georgensgmünd, Germany
  Trumpf GmbH + Co. KG – Booth No. 10
Johann-Maus-Str. 2
71254 Ditzingen, Germany